Just-Rite Equipment

Loading docks are the busiest areas in distribution centers, food and beverage plants, industrial factories, manufacturing facilities, retail outlets, and warehouses.

Gaps between parked vehicles and loading docks allow outside elements such as dust, rain, snow, and wind to enter a facility and also permit air conditioning and heating to escape, increasing energy cost. Dock seals and dock shelters offer ultimate sealing efficiency and protect the loading dock area against outdoor elements.

Just-Rite Equipment, a division of DuraServ, supplies and services Kelley and Serco dock seals and dock shelters for loading dock systems in Connecticut, Delaware, Eastern Pennsylvania, Lower Massachusetts, Maryland, New Jersey, and Virginia.

Call Just-Rite Equipment or connect with us online to choose the ideal dock seals and shelters for your loading dock systems.

Baltimore, MD: (410) 536-0505
Jamesburg, NJ: (609) 448-6550
South Windsor, CT: (860) 528-1036
Sterling, VA: (703) 450-2800

Dock Seals, Dock Shelters, and Installation Services

Dock seals and shelters provide optimum sealing effectiveness and safeguard the loading dock area from outdoor elements.

Dock Seals

Dock seals are foam pads that compress when trailers backs into them, forming a seal around three sides of a trailer. Kelley and Serco dock seals are effective solutions to accommodate loading dock's high volume traffic with consistent trailer widths and differing heights.

Dock Shelters

Dock shelters are enclosures that provide a wiper seal against trailer tops and sides for high sealing efficiency. They offer reliable performance and protection to withstand compression when a trailer backs up to the dock. Kelley and Serco dock shelters accommodate high-volume traffic with a wide variety of vehicle sizes and types.

Dock Seals Options

Kelley and Serco dock seal system shields a loading dock area from external moisture with no required maintenance.

Serco S900DD Dry Dock System
Kelley Aqua-Shield Rain Guard System

Inflatables

Kelley and Serco inflatable dock seals and shelters provide a tight seal for climate-controlled loading docks.

Benefits of Dock Seals and Shelters

Increase Productivity
Increase Loading Dock Door Lifespan
Protection Against Outdoor Elements
Safer Working Environment

Mid-Atlantic Regions’ Most Trusted Dock Seals and Shelters Dealer and Service Provider

For 20 years, Just-Rite Equipment, a division of DuraServ, has installed, sold, and serviced Kelley and Serco loading dock equipment, and accessories in the Mid-Atlantic Regions area including Connecticut, Delaware, Eastern Pennsylvania, Lower Massachusetts, Maryland, New Jersey, and Virginia.

The Just-Rite Equipment team works with clients to ensure safe loading dock areas while our service technicians confirm doors and dock equipment are running properly.

24 hours, 7 days a week, 365 days a year Availability
Expansive Inventory
Large Retailer
Most Trusted in the Market
One Customer – One Contact for All Service Needs
Trained and Certified Technicians

Call Just-Rite Equipment today or connect with us online to discover why we are Mid-Atlantic Regions’ most reliable distributor of dock seals and shelters.

Baltimore, MD: (410) 536-0505
Jamesburg, NJ: (609) 448-6550
South Windsor, CT: (860) 528-1036
Sterling, VA: (703) 450-2800

Loading Dock Equipment, Commercial Doors, and Installation Services in Jamesburg, New Jersey

Since 2001, Just-Rite Equipment, a division of DuraServ, has provided high-quality commercial doors and dependable loading docks to customers in Central New Jersey and Jamesburg, New Jersey. Just-Rite Equipment carries APS, Chase Traffic Doors, Dynaco, Hercules Doors, Hormann-Flexon, Kelly, Serco, LiftMaster, Overhead Doors, TKO Dock Doors, and Wayne Dalton. Our team of professionals offer design consultations outlining timelines, costs, and product solutions for an efficient and effective business operation.

Just-Rite Equipment offers 24 hour availability for parts and service, and annual maintenance programs to extend commercial doors and loading dock systems longevity. Our service team is prompt, trained and experienced with the makes and models of doors and dock equipment we supply.

Call Just-Rite Equipment today at (609) 448-6550 or connect with us online to design, install, and repair commercial doors and loading dock equipment in Jamesburg, NJ.

Just-Rite Equipment's Loading Dock Equipment and Commercial Doors

Commercial Doors

Dock Levelers and Lifts

Dock Seals and Shelters

Safety Equipment and Truck Restraints

Aftermarket Products

Industrial Fans

Jamesburg, New Jersey Industries We Serve

Auto Dealers
Energy Efficient Facilities
Food and Beverage Plants
High Security Facilities
Industrial Factories
Manufacturing Works
Parking Garages
Pharmacies
Refrigeration/Cold Storage
Retail Stores
Service Centers
Transportation and Transit Spaces
Warehousing and Distribution Facilities

Jamesburg, New Jersey’s Most Trusted Loading Dock Equipment Dealer, Commercial Doors Retailer and Service Provider

Just Rite Equipment, a division of DuraServ, carries loading dock equipment and commercial doors by APS, Chase Traffic Doors, Dynaco, Hercules Doors, Hormann-Flexon, Kelly, Serco, LiftMaster, Overhead Doors, TKO Dock Doors, and Wayne Dalton for Burlington, Cranbury, Edison, Elizabeth, Jamesburg, Secaucus, and Sommerville, New Jersey and Philadelphia, PA.

DuraServ was named the 2019 Serco/Kelly Top Volume Distributor for the 16th year.

The Just-Rite Equipment team is confident, skilled and provides top-rated services and high-quality products to our clients. We deliver nationally throughout the United States.

Why Choose Just-Rite Equipment?

24 hours a day, 7 days a week, 365 days a year Availability
Expansive Inventory
Large Retailer
Most Trusted in the Inventory
One Customer-One Contact for all Service Needs
Over 35 Years of Experience
Trained and Certified Technicians

Call Just-Rite Equipment at (609) 448-6550 or connect with us online for guidance in selecting loading dock equipment and commercial doors for your Jamesburg, New Jersey business.

Why Planned Maintenance Service in Loading Docks?

As known loading docks is one of the most challenging to manage and control in almost all in the business industry due to its complexity and large scale of its business activity. Common problems encountered on loading docks include high-cost fixes, loading dock equipment, and machinery breakdowns, and routine/regular maintenance.

High-cost Fixes.

A bunch of problems would pop-up unexpectedly when equipment or devices simply fail to function, such as replacement or upgrade cost, a decrease of work downtime, and employee safety.

A simple damaged vehicle restraint that would not function properly will result in accidents and hazards towards the workers and to the equipment and machinery, which eventually will lead to a major inoperable loading dock breakdown.

However, with planned maintenance service the costly repairs and insurance paper works can be prevented by eliminating the problem before it happens. It is the best and most cost-effective maintenance solution that meets business needs.

Loading dock Equipment/Machinery Breakdowns.

Loading dock equipment such as dock doors, restraints, and dock levelers are used and beaten up many times over on a daily basis. In due time, they will have problems and eventually will breakdown. As based on a factual study, 70 to 85 percent of all machinery and equipment breakdowns are ineffective maintenance.

Loading dock planned maintenance service can protect dock equipment and machinery from such breakdowns through a routine or regular checks by a professional team of technicians and engineers. Keeping them up in their best forms and functions as though brand new.

Optimization of Efficiency.

Overall, planned maintenance service minimizes downtime, maximizes productivity and protects your investment. By preventing accidents and hazards from happening, the downtime rate will be minimized. Parts and accessories can supply the needed equipment and devices that need to be replaced in no time. Productivity will increase with no work lost time, enhancing workers to improve productively. And lastly, company investment is safe and protected.

To know more about our planned maintenance service, call Just-Rite Equipment at Sterling, VA (703) 450-2800, Baltimore, MD (410) 536-0505, Jamesburg, NJ (609) 448-6550 and South Windsor, CT (860)528-1036, or at http://bit.ly/2Ss9fvY.

At Just-Rite Equipment, a division of DuraServ, has a team of professionals offering design consultations with you outlining timelines, costs and the care of your purchased product. We offer annual maintenance programs to assist you in extending the life of your loading dock business.

If loading dock repair is required, our service department is available for an over-the-phone consult to possibly troubleshoot your issues prior to an onsite repair visit. Our emergency response repair team is prompt and experienced in all makes and models of any door. We are available 24 hours for loading dock parts and service.

Make a Service Request at http://bit.ly/2PVQXRN, our Service Area Offices would be happy to serve at loading dock maintenance service Sterling VA, loading dock maintenance service Baltimore MD, loading dock maintenance service Jamesburg NJ, and loading dock maintenance service South Windsor CT.

You can visit our Service Areas: Sterling, VA, Baltimore, MD, Jamesburg, NJ, Delaware, Eastern Pennsylvania New Haven, CT, Farmington, CT, Windsor, CT, Hartford, CT, Fairfield, CT and Springfield, MA.

The most suitable door for this facility is the Hercules Infitting Hinged Freezer Door for Cold Storage Facilities in Sterling, VA. It is designed to be utilized in environmentally controlled buildings such as freezers and coolers where only hand trucks and personnel movement are necessary. It provides a thermal performance of high R-value, superior airtightness and low thermal bridging in result to 30% cost-effectiveness versus the traditional multi-part cold storage doors.

Our engineers are trained to design high-performance doors to meet the specific design criteria of the clients. As a matter of fact, the proven performance and high customer satisfaction of the Hercules product lines are worldwide. It specializes in cold storage, controlled environment, food and beverage processing/distribution, and pharmaceutical industries.

If you are in Sterling, VA and opted to get hold of the door, it is highly recommended to avail the services of Just-Rite Equipment, a division of DuraServ. We are dedicated to serving our customers with products and services, which satisfy the highest level of specifications to achieve all major international industry certification standards.

We offer Hercules Infitting Hinged Freezer Door for Cold Storage Facilities complemented with the highly skilled installation by our well-trained technicians. The following are its benefits:

Quick and easy installation
Excellent thermal properties
Extensive range of options

For your needs about Hercules Infitting Hinged Freezer Door, Hercules freezer door, high performance doors, high speed doors, Hercules Infitting Hinged Freezer Door Sterling VA, Hercules freezer door Sterling VA, and high performance doors Sterling VA, please visit our official website to learn more at https://tinyurl.com/qwcr328.

For your queries, you may contact us through telephone numbers:

Sterling, VA (703) 450-2800
Baltimore, MD (410) 536-0505
Jamesburg, NJ (609) 448-6550
South Windsor, CT (860)528-1036

You may also contact us through email via our webpage at https://tinyurl.com/sgqdr7p and you may send us your service request at https://tinyurl.com/vwj93tj.

Our service areas are always open to serve you at the following locations:

Sterling, VA
Baltimore, MD
Jamesburg, NJ
Delaware
Eastern Pennsylvania
New Haven, CT
Farmington, CT
Windsor, CT
Hartford, CT
Fairfield, CT
Springfield, MA

Our courteous coordinators await your call to provide you with the utmost services to meet your cold storage door needs.

Wayne Dalton's Model 900 Rolling Service Door is ideal for jobs where an economical solution, as well as durability and strength, are needed. This door offers flexibility in curtain materials with choices of galvanized steel, stainless steel, or aluminum.

Our Model 900 rolling service doors at Just Rite Equipment are composed of curved or flat-faced slats that provide a natural watershed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils. Model 900 features a strong double-angle bottom bar designed for easy installation and does not require fasteners in the guide openings, so the bottom bar does not interfere with door operation. The counterbalance assembly consists of a spring barrel that serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033" per lineal foot of span.)

Features

Key Product Features

Max Width: 14’*
Max Height: 14’*
Max Steel Gauge = 20
Steel, aluminum or stainless steel construction
2” flat or curved slats
Wind load ±20 psf standard; options up to ±31 psf
Double-angle bottom bar reinforces the lower edge of the curtain

Common Applications

Warehouse and Industrial spaces
Manufacturing facilities
Food and Beverage facilities

Door Options

Options & Accessories

Secur-Vent® perforated slats (Flat slat only)
Cable reels
Bottom bar: stainless steel or aluminum double angle, extruded aluminum angle, structural steel angle (galvanized steel only), sloped
Exhaust ports
Mullions
Curtain finish: stainless steel #4, mill, clear or bronze anodized aluminum, G-90 galvanized bare or painted gray, powder coat (RAL and custom)
Locking: slide bolts, cylinder, Best lock, thumb turn
Perimeter seals: angled guide brush seal, vinyl guide seal, exterior and interior lintel weather seal, internal hood baffle

Operation Options

Crank (awning, wall)
Chain hoist
Motor
Through wall

Wind Load Options

Options up to ±31 psf

From a countless selection of commercial steel doors to high-speed commercial doors Wayne Dalton offers versatility and innovation for business owners. At Just Rite Equipment, we stand by the products and brands we offer because they represent us as much as we do! We choose to offer Wayne Dalton products because we can rely on their performance after our installation. After all, we wouldn't be able to over-deliver without offering top-of-the-line products.

Not sure where to start? If you're interested in looking at Wayne Dalton door options for your business, we offer free consultations. Our technicians at Just Rite Equipment will show you samples and can even digitize what your custom overhead door will look like. Let's step up your curb appeal! Call us today.

When choosing which company to get dock levelers from, you must consider it being exemplary from the rest. You should analyze from the product’s advantages, distinct features, efficiency, and long-term benefits. It’s a lot pre-requisite for a dock leveler installation.

To give you an idea about Just-Rite Equipment specialty dock levelers and their functions, here is an overview:

Serco Versadock Dock Leveler

Full 9′ Wide Below-dock Access
Patented HYDRA MAX Powered-in/Powered-out Lip Extension
Regenerative Hydraulics
Yieldable Hydraulic Lip
Auto Return-to-Dock
Push-button Quick Cycle Lip Extension
Steel NEMA 12 Push-button Control Panel (Non-Interlock Capable)
Hydraulic Velocity Fuse Safety Stop
CLEAN FRAME® Design
Full Operating Range Toe Guards
Below-dock Endloading Capability
Grease Fittings
Integral Maintenance Strut & Lip Support Latch (Dual Struts on 80K Capacity Only)
Weatherseal
Full Pit Steel Kit Including Pit Floor Embeds
Heavy-duty B410-14F Dock Bumpers

Serco Power-Assisted Dock Leveler Model PAL

The PAL combines two proven technologies, the durability of a mechanical leveler and Serco’s proven, high-performance, hydraulic operation. It has a strong upward bias, the PAL utilizes a hydraulic power-pack assembly and counterbalances assist to produce a slight downward bias. Also, it is designed to maintain an efficient operation 24-7. In the event of a power failure during loading/unloading, the PAL can be restored, and the building secured, with an easy-to-use manual override device.

Product Features

New! Exclusive SafeTFrame® Design
Manual Override/Power Outage Capability (Activation Tool Included)
Structural Steel Safety Legs with Reflex™ Anti-Stump-out System
Exclusive HYDRA CAM™ Plus Automatic Lip Extension
High Tensile Steel Lip, Deck & Beams
Non-Metallic Push-button Control Panel (Non-Interlock Capable)
120V Single Phase Operation
CLEAN FRAME® Design
Full Operating Range Toe Guards
Below-dock Endloading Capability
16″ Lip Standard
Grease Fittings
Integral Maintenance Strut & Lip Support Latch
Heavy-duty B410-14F Dock Bumpers

Serco Vertical Dock Leveler

Product Features

Leveler Powered Down to Working Range via Constant Pressure – Push-button
Dual Acting Lip Powered Both Directions
Steel NEMA 12 Control Panel (Interlock Capable) with Raise, Lower, Lip In, Lip Out, Mushroom-style Stop, Amber & Green Illuminated Operation
Indicator Lights
PLC Programmable Controller
Remote-mounted Power Unit, Valves & Solenoids with Mounting Bracket & 20″ Hydraulic Hose
Patented Hinged Bottom Draft Pad
Terminals for Interlocking Door or Restraint
Rear Embed Mounting Channel with 5 Factory-Welded Hinges
4″ High Runoff Guards
Structural Channel Beam Deck
Integral Maintenance Locking Bar with Lock-out/Tag-out Capability
Two VB420-11FF Bumpers with Riser Brackets

Kelley KM Mechanical Edge-of-Dock Leveler

Product Features

Exclusive Lug Style Lip Hinge provides superior strength and extended life
High Strength Steel Tread Plate (Ramp & Lip)
Robotic Welding for improved strength, quality and consistency
Reliable Dual Extension Spring Lifting Mechanism
Ergonomic Design – Easy operation that requires less lifting force
Exclusive EZ-Lift™ Spring Assist on Lip Hinge reduces lifting force
Heavy Duty Steel Lifting Handle with Safety Grip
Operating Range is 5″ (127 mm) above to 5″ (127 mm) below dock
Effective Working Range is 3” (72.6 mm) above to 3” (72.6 mm) below dock
Lower Profile Design reduces interference with material handling equipment
Beveled Lip Edge (11 degrees) provides a smooth interface with trailers
15” (381 mm) Lip Standard (Optional 17” (432 mm) lip available for refrigerated trailers)
Tire Laminated Bumpers mounted to steel bumper blocks – 16” (406 mm) projection
Exclusive EZ-Hang™ installation system simplifies install
Integral Maintenance / Service Strut

Kelley VSL Vertical Storing Dock Leveler

Product Features

Leveler Powered Down to Working Range via Constant Pressure Push-button
Dual Acting Lip Powered Both Directions
Steel NEMA 12 Control Panel (Interlock Capable) with Raise, Lower, Lip In, Lip Out, Mushroom-style Stop, Amber & Green Illuminated Operation
Indicator Lights
PLC Programmable Controller
Remote-mounted Power Unit, Valves & Solenoids with Mounting Bracket & 20′ Hydraulic Hose
Patented Hinged Bottom Draft Pad
Terminals for Interlocking Door or Restraint
Rear Embed Mounting Channel with 5 Factory-Welded Hinges
4″ High Runoff Guards
Structural Channel Beam Deck
Integral Maintenance Locking Bar with Lock-out/Tag-out Capability
Two VB420-11FF Bumpers with Riser Brackets

Serco Vertical Hydraulic Rail Leveler

This dock lever is designed specifically for rail car operations. With the same vertical storing and safety features as its dock leveler counterpart, the Rail Leveler which is an ideal solution to increase efficiency during rail car loading operations.

Product Features

Leveler Powered Down to Working Range via Constant Pressure Push-button
Steel NEMA 12 Control Panel (Interlock Capable) with Raise, Lower, Lip In, Lip Out, Mushroom-style Stop, Amber & Green Illuminated Operation
Indicator Lights
PLC Programmable Controller
“Quick-Cycle” Powered-In/Powered-Out Hydraulic Lip Activation
20″ Lip Standard
Includes End Loading Capability
On Manual Side Shift Units, Lateral Rail Brake Prevents Side Shifting When Leveler Is Lowered
6″ High Runoff Guards

Loadhog

Product Features

Easy installation – No Concrete Pit Required
Superior Environmental Control
Superior Sanitary and Rodent Control
Improves Loss Prevention
Superior Cost of Ownership
6′, 6′ 6″ & 7′ Widths Available
Working Range 6” Above & 4″ Below Dock
Extended Lip Purchase (18″ Equivalent)
Rugged Capacity – Permits Use With 3-wheel & 4-wheel Lift Traffic
4″ Side-to-side Tilt To Accommodate Uneven Trailers

Kelley Model VERSA DOCK Extra Wide Hydraulic Dock Leveler

Product Features

Full 9′ Wide Below-dock Access
Hydraulically Controlled Vertical Bumpers
Hydraulic Powered-in/Powered-out Lip Extension
Regenerative Hydraulics
Yieldable Hydraulic Lip
Auto Return-to-Dock
Push-button Quick Cycle Lip Extension

Steel NEMA 12 Push-button Control Panel (Interlock Capable)

Hydraulic Velocity Fuse Safety Stop
Open Subframe Design
Full Operating Range Toe Guards
Below-dock Endloading Capability
Grease Fittings
Integral Maintenance Strut & Lip Support Latch (Dual Struts on 80K Capacity Only)
Weatherseal
Full Pit Steel Kit Including Pit Floor Embeds
Heavy-duty Steel Faced Dock Bumpers

Just-Rite Equipment has been known for providing high-quality and dependable commercial dock levelers to customers in the Mid-Atlantic regions. Our team of professionals offer design consultations with you outlining timelines, costs and the care of your purchased product from Just-Rite Equipment. We work with all the best names in the industry: Serco, Kelly, TKO. We are servicing Sterling, VA, Baltimore, MD, Jamesburg, NJ

Delaware, Eastern Pennsylvania, New Haven, CT, Farmington, CT, Windsor, CT, Hartford, CT, Fairfield, CT and Springfield, MA.

For your loading dock solutions and specialty dock leveler in Baltimore MD , call us through these phone numbers or visit our site:

Sterling, VA (703) 450-2800
Baltimore, MD (410) 536-0505
Jamesburg, NJ (609) 448-6550
South Windsor, CT (860)528-1036
https://www.justriteequip.com/contact/
https://www.justriteequip.com/service-request/

Liftmaster 115v Hoist Logic Operator Model MH is a Medium-Duty Logic hoist operator from Just Rite Equipment, a Division of DuraServ that features an adjustable friction clutch, a standard solenoid brake, a high-starting torque motor, a compact design and an emergency chain hoist with an electric interlock.

Here is the feature of LiftMaster 115v Hoist Logic Operator:

For use on smaller, lighter commercial doors with mid-range duty cycle requirements.
Rated duty cycle: Maximum 12 cycles per hour; Less than 50 cycles per day.
Wall mount for high or vertical lift sectional doors or small rolling doors and grilles.
Chain hoist with electric interlock for manual operation in an emergency.

Business Safety and Security

Security

Built-in 3-Channel Security+ Receiver allows you to learn/program up to 20 LiftMaster 315 MHz remote controls.

Safety Standards

Meets UL 325 Safety Standards.

Commercial Safety Sensors

Protect people and vehicles with safety sensors and accessories that stop the door from closing on obstructions.

Timer to Close

Integrated timer-to-close programmable from 5 to 60 seconds in 5-second increments. Allows for timed automatic door closure after the door reaches the fully open position.

Commercial Power

115 Volts
1/2 HP, 115V single-phase motor
NEC Class
24V NEC Class 2 control circuit

Commercial Accessories

Single Button Control

Single-button control provides additional input for single-button control functionality. Required for installation of any external radio receiver.

Auxiliary Limit Switches

Auxiliary limit switches provide additional limit switches with dry form C contacts at the open and closed-door positions to control lights, heaters and dock levelers.

Interlock Switch

Interlock switch disables the operator control circuit when the door is locked, preventing damage to the door and operator.How Door Operator Works and Its Features

Servicing customers in Maryland, New Jersey, Virginia, Delaware, and Eastern Pennsylvania, Just Rite Equipment offers high-quality door operator products at an excellent price. With so many years of experience, we are able to provide tested quality products to make homes accessible and safe to all regardless of age or ability. All products we carry are built to last and backed by reliable customer service and satisfaction. With our fleet of fully stocked vehicles and a team of factory-trained service technicians, we work around the clock to keep your loading dock equipment operating safely and efficiently. Our unwavering goal is to have you delighted with our service and products. Give us a try you will be happy you did! Contact us today.

Just-Rite Equipment, a division of DuraServ Corp. proficiently managed to offer the Wayne Dalton - Model C-24 Steel Sectional Door for your commercial facility.

We are committed to providing high-quality and dependable commercial sectional steel doors to our customers in Connecticut.

To proficiently carry out the best door products, we opted to work with all the best companies such as Serco, Kelly, TKO. For doors, we have a wide variety and superior brands to choose from like the Cornell/Cookson, Clopay, CHI, Wayne Dalton and Haas.

Due to wear and tear, maintenance will be observed over time. Relative to this, we formulated an annual maintenance program to provide you with the utmost maintenance program to extend the lifespan of your sectional steel door. Later on, if a repair will likewise be required, we offer the over-the-phone consultation for troubleshooting to promptly address your concern prior to the conduct of an onsite repair.

Moreover, we have a pool of highly trained technicians who will provide you with your sectional door needs 24/7.

At any rate, we highly recommend the installation of Wayne Dalton - Model C-24 Steel Sectional Door for your commercial facility because of the following best features:

The design provides high strength at an excellent value;
It features 24-gauge ribbed steel sections and 20-gauge center and ends stiles to showcase its durability;
It is designed, engineered, and constructed to enhance the building’s architectural beauty;
It assures the smooth, efficient and long and trouble-free operation that saves installation time and effort;
It includes the insulation and weather stripping, factory-installed vision lights or full view sections, electric operator, and special engineering to meet wind-load requirements.

Based on the above-mentioned attributes the Wayne Dalton - Model C-24 Steel Sectional Door is the best sectional steel door product with unsurpassed high-end attributes. On top of this, we provide the well-trained technicians to personally install your door to ensure that the correct installation method is observed.

For your needs about Wayne Dalton doors, Wayne Dalton sectional doors, sectional doors, commercial sectional doors, Steel Sectional Door Connecticut, and Wayne Dalton Steel Sectional Door South Windsor CT, you may visit our official website for more details at https://www.justriteequip.com/products/door-products/commercial-sectional-doors/#WayneDalton-ModelC-24SteelSectionalDoor

For your queries and other concerns, you may contact us through the following telephone numbers:

Sterling, VA: (703) 450-2800
Baltimore, MD: (410) 536-0505
Jamesburg, NJ: (609) 448-6550
South Windsor, CT: (860)528-1036

You may also send us an email and send us your service requests via our webpage at https://www.justriteequip.com/contact/ and https://www.justriteequip.com/service-request/, respectively.

Our service areas are regularly open for business to serve you better at:

Sterling, VA
Baltimore, MD
Jamesburg, NJ
Delaware
Eastern Pennsylvania
New Haven, CT
Farmington, CT
Windsor, CT
Hartford, CT
Fairfield, CT
Springfield, MA

Please feel free to contact us for a free consultation. Our courteous coordinators await your call to provide you with the best and utmost service delivery for your complete service satisfaction.

Just-Rite Equipment has top-of-the-line APS Protective Systems that you could choose from:

1. SERCO Safety Gate
This guard safety gate acts as an extra barrier preventing accidents and overhead door damage. In a closed position, it protects workers, goods, and forklift from falling off through an open door in a loading dock. It has proven to withstand up to 15,000 lbs load traveling at 4 mph. This gate is cost-efficient as it protects dock doors, door tracks, and hardware from forklift impact.

Impact-A-Track

This safety feature is attached to the door to endure collision from the vehicle while making the operation of overhead doors smooth. Available in 3 feet, 6 feet, and full door heights, it can sustain bare fork or counterweight impacts.

3. APS Sentry Rail
This rail is an additional safety device for your existing system for more stability and strength. Available in single rail (18 inches) or double rail (42 inches), it has an optional removable or swing gate and can be easily installed or relocated depending on your need. This rail can endure up to 10,000 lbs load at 4 mph.

4. APS Trak Sentry

This four feet metal made from heavy-duty steel is an additional protection from lift’s battering. It is wrapped around the door’s track without interference on the door’s function. Six industrial-grade nuts and bolts are included and used to mount Trak Sentry on the floor.

5. APS Z-Track Guard
This track guard is a cost-efficient way to safeguard your door tracks. Available in 30 inches and 48 inches, this metal is attached to the door without a base plate that does not use up floor space.

6. Heavy Duty Fork Sentry
This is highly visible, gusseted, eight-inched heavy-duty steel that protects employees, vehicles, and goods from lift truck traffic and forks. It is also available in other sizes, customized for your applications.

7. Illinois Engineered Products Security Gate
This pair-folding security gate secures docks while maintaining visibility and air circulation. It is the strongest in the market being made from solid galvanized steel and riveted back-to-back with aircraft-quality aluminum rivets. This could withstand all season, all year round. Since our pairing doors pivot 180 degrees, it folds completely, leaving no obstruction on the doorway.

8. Guard Rail
Designed absorb impacts from vehicles like lifts and sweeper, this durable guard rail is used to prevent injuries and accidents in the workplace. Despite being durable, it is easy to install, expand and relocate and is customizable to your needs.

9. Rack Sentry - Cut Out Option
This is a strong cut out placed on rack beams to provide maximum stability on the racks and profiles. It absorbs the impacts of tow motors and pops back to original shape after impact, thus eliminating rack damage and are always on guard. Its easy and versatile feature allows usage virtually anywhere.

10. Rack Sentry Corner Design
With the same durability as the Rack Sentry - Cut Out, this feature is installed on the end of the rack installation. It provides 270 degrees of protection, protecting both the front and end of the rack. Ideally designed to fit three inches wide rack uprights but could still be applied to other width uprights.

11. Standard Rack Sentry Protection
This is installed on the rack uprights as protection from collision absorbing shock and popping into the original position after impact. This has been tested to endure 5,000 lbs on 3mph without incurring damages. This rack protector does not need to be drilled on the floor, not causing any stress or damage to the floors.

Just-Rite Equipment, a division of DuraServ, has already been proven of providing the best quality safety equipment and protective systems from sales, maintenance to repairs, we aim to be the Most Trusted in the Industry.

For more inquiries on safety equipment Jamesburg NJ, protective systems Jamesburg NJ, APS protective systems Jamesburg NJ, you may contact: Sterling, VA: (703) 450-2800, Baltimore, MD: (410) 536-0505, Jamesburg, NJ: (609) 448-6550, and South Windsor, CT (860)528-1036.

You may reach us at: https://www.justriteequip.com/contact/, or make a service request at
https://www.justriteequip.com/service-request/.

Hydraulic dock levelers were the only alternative choice to manual levelers, or simply known as mechanical levelers in the industry. It uses a simple hydraulic circuit that consists of a pump, cylinder and valves to raise and lower the leveler platform. There are millions of hydraulic levelers in use around the world. A large number installed them as a witness of how reliable the technology is, but today it is the third most famous popular design after the mechanical and air powered dock leveler. Furthermore, hydraulic dock levelers are best suited for heavy-load applications.

Air-powered dock Levelers provide an airbag to raise and lower the loading dock levelers. The airbags in these levelers gives a little similarity to the stylish airbags found in automotive and this is how people imagine when they see the word airbag. Level airbags are created from a woven polypropylene fiber membrane, coated with a durable PVC shell. These strengthens air bladders that takes advantage of their size to move heavy loads with low-pressure air.

Unlike the hydraulic levelers, air-powered levelers provide improved simplicity. High volume, low-pressure pump inflates the air bags. It eliminates the messy hydraulic fluids using air and prevents issues with leaky seals and connections.

When it comes to powered dock levelers, both the air and hydraulic systems are capable of providing years of trouble-free operation.

Industry Serco and Kelley has installed many dock levelers and more than 135,000 and received a lot of positive feedbacks.

Just-Rite Equipment, a division of Duraserv since 2001. We are known for providing high-quality and dependable commercial doors and loading docks to customers in the mid-Atlantic regions. Our professionals provide design consultations.

You can also visit or contact us in our convenient areas, Baltimore, MD (410) 536-0505 | Sterling, VA (703) 450-2800 | Jamesburg, NJ (609) 448-6550 | Jamesburg, NJ (609) 448-6550 | South Windsor, CT (860)528-1036 or visit our website https://www.justriteequip.com/contact/ or https://www.justriteequip.com/service-request/.

Why Choose Hercules Heavy-Duty Vertical Sliding Door for Warehouse Loading Docks in Sterling, VA

A warehouse loading dock is an establishment or facility that allows the trucks to unload and load the goods efficiently and safely. It is designed for safety and it helps to hasten the transfer of goods in and out of the building or facility.

Usually, a warehouse loading dock is found in the industrial and commercial buildings, freight-terminal and facilities, where it has different applications like food and beverage, pharmaceuticals, heavy industrial applications and refrigeration/cold storages.

For refrigeration and cold storages, perishable goods like fresh meats, vegetables, fruits, fresh fish, dairy products, products need for pharmaceutical industries, food processing companies needs to be stored in warehouse loading docks to have a longer lifespan and storage, after which goods or items be delivered to the table of every household.

Some cold storage loading dock facility managers managed to invest in their facilities by using an all-in-one loading dock doors, which they thought may have saved their company of thousands of dollars, however, in the long run, it seems so good to be true.

Nowadays, modern and smart facility managers take into great considerations not only major factors but also minor concerns and issues such as space, speed, workloads, and others, with great considerable importance as one of the factors to have a long term investment success for a company.

Hercules, a company with 64 years of experience, technical knowledge and manufacturing capabilities has the answer to your controlled environment door solutions. Unlike any ordinary vertical sliding doors, HERCULES high performance and high-speed sliding doors offer a complete line of specialty doors for your specific applications that perfectly suits and needs of any controlled environment business such as food manufacturers and distributors in the dairy, meat, produce, beverage, pharmaceutical, and food processing industries.

The HERCULES Series Vertical Lift cold storage door is the solution for your cold storage system. Strongly featured, with its flexibility designs and highly applicable to multiple building applications.

Beneficially ideal for applications where the side room is minimum or when several door openings are close together, thus saving more space and work downtime which eventually comes with more company profits.

Next, the solution to the traditional loading dock problem-drive-thru traffics for forklifts and freight vehicles. Drive-thru traffic causes hazards and accidents in which a lot of companies are burdened with unexpected costs, however, with Hercules Heavy-Duty Vertical Sliding Door’s unique engineered design, drive-thru traffics are no more.

Other notable and specifications features:

Superior airtightness

Thermal performance of high R-value
Low thermal bridging
Available with electric or manual operation
The double vertical lift door is also available (Limited Headroom) to slightly more than half the door height
Flexible Custom Counterweight that matches the weight of each individual door
Uses NEMA 4 Control Box where durability and safety are ensured
Built for long-lasting usage with its heavy-duty hardware and tracks

Hercules Heavy-Duty Vertical Sliding Door

Specification Highlights:

Width: 5'-10'/Height: 7'-10'/Thickness: 4" 6"
R-Value: 33 50
Insulation: Polyiso CFC-free(Foamed-in-Place)
Door Panel: Structural Framed(HDPE Rails Clad)
Metal: 24, 26 Gauge Stucco(Embossed)/Galvanized Steel(Painted)
Safety Edge: Pneumatic Instant Reversing (Full Height)
Defrost: Freezer Doors(120 volt Perimeter Cables)/Gaskets Frost-free
Operation: Manual/Electric

Either you want a new cold storage sliding door, or simply making an upgrade for your cold storage sliding doors, call Just-Rite Equipment, a Division of Duraserv at Sterling, VA (703) 450-2800, Baltimore, MD (410) 536-0505 and Jamesburg, NJ (609) 448-6550, or through our website at https://www.justriteequip.com/contact/.

For any questions and orders on our Hercules vertical sliding door Sterling VA, you can make a Service Request at https://www.justriteequip.com/service-request/, our Service Area Offices at VA, Baltimore, MD, Jamesburg, NJ, Delaware, Eastern Pennsylvania, New Haven, CT, Farmington, CT, Windsor, CT, Hartford, CT, Fairfield, CT, and Springfield, MA are available to help you with all your cold storage sliding door needs.

Wayne Dalton - Model 800C Thermotite Rolling Steel Service Door Designed for Tough Commercial or Industrial Application in Jamesburg, NJ

Wayne Dalton- Model 800C Thermotite Rolling Steel Service doors offer an excellent combination of security, strength, and convenience to any industrial facility in Jamesburg NJ. They are ideal for a warehouse, loading dock, or even a storefront. With so many benefits, it’s no wonder these types of doors have become so popular. Let’s take a look at some of the benefits of using Wayne Dalton doors. Unlike a sectioned door, thermotite steel service doors are built for optimal ease. Section doors have as many as 40 moving parts that can accumulate dirt and debris. Wayne Dalton Rolling Steel doors in Jamesburg NJ, when it comes to having a warehouse, loading dock, or any kind of tough commercial or industrial application in Jamesburg NJ that utilize rolling steel doors, space is crucial. The more space is taken up by the door, the less space that can be used for your business purposes. Rolling steel doors are mounted to the walls. This eliminates the need to connect to the ceiling, thus taking up less space.

Wayne Dalton’s ThermoTite® 800C Rolling Service Door is designed to meet the tough requirements of virtually any commercial or industrial application, with the added advantage of energy efficiency. The ThermoTite® 800C offers flexibility in substrate materials with choices of galvanized or primed steel, stainless steel or aluminum. This door is designed to withstand wind loads of up to ±20 psf standard, with optional wind load ratings of up to ±55 psf.

These insulated rolling service doors are composed of flat slats that provide a natural watershed, helping to reduce corrosion. Foamed-in-place polyurethane insulation with an R-value* of 7.7 fills the slat to enhance a building’s thermal efficiency. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

Model 800C features a strong double-angle bottom bar designed for easy installation and does not require fasteners in the guide openings, so the bottom bar does not interfere with door operation. The counterbalance assembly consists of a spring barrel that serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033" per lineal foot of span.)

*Wayne Dalton uses a calculated door section R-value for our insulated doors.

Key Product Features
Max Width: 42’*

Max Height: 30’*
Max Steel Gauge = 18
Steel, aluminum or stainless steel construction
Wind load ±20 psf standard; options up to ±55 psf
R-value** = 7.7; U-value** = 0.1

*Larger sizes may be available.
**Wayne Dalton uses a calculated door section R-value and U-value for our insulated doors.

Common Applications
Warehouse and Industrial spaces

Manufacturing facilities
Food and Beverage facilities

Door Options

Options & Accessories

Vision slat
Safety edges
Drop stop device
Exhaust ports
Sloping bottom bars
Cable reels
Mullions
Stainless steel or aluminum finish
18- and 20-gauge front slats

IECC Air Infiltration Option

Guide cover and cap
Dual brush guide seal
Lintel seal
Bottom astragal

Operation Options

Chain hoist
Motor
Through wall

Wind Load Options

Articulating Windlocks for Operational wind load
Options available to meet up to Dade County - Florida Building Commission High-Velocity Hurricane Zone (FBC HVHZ)

At Just-Rite Equipment, we have additional add-on products to enhance the performance of your commercial door or loading dock. Our parts department is available when you just need something quick and our hours and shipping are convenient as well. Since we are one of the largest providers of loading docks and door equipment in the United States, you can depend on us to provide you with superior quality and exceptional service.

Just-Rite Equipment has the products to work with any commercial setting that has a dock; we specialize in food distribution, retail, and manufacturing. As part of the DuraServ family, we work closely with the National Teams on major retail accounts. Our mission is “to be the most trusted sales and service distributor in our market” and we live by it! You can contact us today if you have questions for purchases, installation, and maintenance of your commercial doors and loading docks. You can reach us at (609) 448-6550 today!

Upgrade Your Old Loading Dock System With State-of-the-Art Technology by Just-Rite Equipment

One of the most significant piece of equipment in a loading dock system is the loading dock leveler. The methodology of loading engagement requires a loading dock leveler to smoothly facilitate the transfer of goods and commodities to and from the warehouse facilities. It serves as the bridge between the warehouse facility and the transport vehicle. That being said, the loading dock leveler is part of the loading dock as it is being mounted to the endpoint of the dock. However, most often than not the loading dock leveler is an overlooked piece of equipment.

The attributes of the loading dock leveler should be considered when purchasing the equipment because not all levelers have the equal qualities. Thus, the careful selection of the loading dock leveler is vital because it affects the transfer efficiency of the goods and commodities. Moreover, it will also play an important role to sustain the accident-free space.

Further, it is imperative that loading dock levelers are regularly be inspected and mechanically be maintained. Otherwise, a defective loading dock leveler will post a risk or danger against the goods and workers.

In view of the foregoing, the loading dock leveler should regularly be scheduled for maintenance. Since it is equally important to maintain the loading dock leveler like the loading dock door, maintenance to this effect should not be taken out into consideration to prevent the long term damage to the business operation.

With the integration of modern advancement in the warehousing industry, it is worth noted to remember that efficiency should always be considered for the incorporation of the high-end hydraulic loading leveler. To this effect, the wise selection and purchase of the equipment are important.

If you are in need to get hold of a high-quality loading dock leveler and an efficient installation from the skilled technicians, you may avail the products and services of Just-Rite Equipment, a division of DuraServ.

We offer a wide choice of high-end and durable hydraulic dock levers and other pertinent equipment. The process, a hydraulic dock leveler will cost upfront more than a mechanical leveler but if you are meticulous enough you will be able to observe that the overhead cost for the regular dock leveler maintenance and repair is more expensive than if you purchase a hydraulic leveler.

If you decide to upgrade your old dock leveler to our state-of-the-art technology, you may avail the following equipment:

1. APS Air Bag Conversion Kit

2. APS Flexback Panel

3. APS Hydraulic Conversion Kit

For your needs about loading dock, loading dock equipment, loading dock equipment upgrades, APS airbag conversion kit, APS Flexback panel, APS Hydraulic conversion kit, loading dock equipment New Haven CT, loading dock equipment Springfield MA, loading dock equipment Sterling VA, loading dock equipment Baltimore MD, and loading dock equipment Jamesburg NJ, you may visit our official website to learn more at https://www.justriteequip.com/products/aftermarket-products/equipment-upgrades/

For your queries, you may reach us at the following telephone numbers:

· Sterling, VA (703) 450-2800

· Baltimore, MD (410) 536-0505

· Jamesburg, NJ (609) 448-6550

You may also contact us via email through our webpage at https://www.justriteequip.com/contact/. For your service request, you may send it at https://www.justriteequip.com/service-request/

To serve you better, our service areas are always open to serve you located at, Sterling, VA, Baltimore, MD, Jamesburg, NJ, Delaware, Eastern Pennsylvania, New Haven, CT, Farmington, CT, Windsor, CT, Hartford, CT, Fairfield, CT and Springfield, MA.

Our committed coordinators are always available to serve you with the utmost diligence for your full satisfaction.

Which Type of Loading Dock Leveler is Suitable for Your Business in Baltimore, MD?

Longing to simplify or sustain the flow of your business operations, one of the basic steps to do first is selecting one of the most trusted brands that you are going to work with. It is about making sure that the company brand has high-quality products and dependable customer service too – offering a team of exceptionally-trained professionals.

If you are doing business in Baltimore, MD which needs superior brands of Loading Dock Levelers, Just-Rite Equipment, a division of DuraServ Corp is simply a call away. Their loading dock levelers and lifts can perfectly help your dock loading and unloading process become smooth and efficient.

They have Mechanical Dock Levelers, Hydraulic Dock Levelers, Airpowered Dock Levelers, Specialty Dock Levelers, Loading Dock Options, and Dock and In-Plant Lifts that come with innumerable capabilities and movement mechanisms that fit the specific needs of your business.

To give an overview of the loading dock equipment by Just-Rite Equipment, here are some of the products with its design highlights:

A. Mechanical Dock Leveler Model WL

Standard Capacity – 30k and 35k

Unlimited Float Hold-down

Exclusive Hydra Cam (Plus Automatic Lip Extension)

Clean Frame

Single Adjustment Point Extension Spring Counterbalance

High Tensile Steel Lip, Deck & Beams

Structural Steel Safety Legs

Working Range Toe Guards

Below-dock End-loading Capability

Integral Maintenance Strut & Lip Support Latch

Heavy-duty Dock Bumpers

B. Serco Hydraulic Dock Leveler Model HLQ

Powered-in/Powered-out Lip Extension

Regenerative Hydraulics

Yieldable Hydraulic Lip

Non-Metallic Push-button Control Panel (Non-Interlock Capable)

Single Phase or Three Phase Power

Hydraulic Velocity Fuse Safety Stop

Full Operating Range Toe Guards

Below-dock End-loading Capability

Integral Maintenance Strut & Lip Support Latch

Mushroom-style Stop Button

Independent Hydraulic Lip Control (Quick Cycle)

Steel NEMA 12 Control Panel (Interlock Capable)

C. Serco Air Powered Edge-of-Dock Model

Push-button operation

Patented high volume, low pressure air bag lift system

Lift system fully operational under extreme temperatures

Exclusive Lug Style Lip Hinge

High Strength Steel Tread Plate (Ramp & Lip)

Robotic Welding

Lower Profile Design

Beveled Lip Edge

Tire Laminated Bumpers

Exclusive EZ-Hang installation system simplifies install

Integral Maintenance / Service Strut

D. Serco Versadock Dock Leveler

Full 9′ Wide Below-dock Access

Regenerative Hydraulics

Yieldable Hydraulic Lip

Auto Return-to-Dock

Push-button Quick Cycle Lip Extension

Steel NEMA 12 Push-button Control Panel

Hydraulic Velocity Fuse Safety Stop

Full Operating Range Toe Guards

Below-dock Endloading Capability

Full Pit Steel Kit Including Pit Floor Embeds

Call us for more inquiries regarding loading dock levelers Baltimore, MD, loading dock levelers New Haven CT, loading dock levelers Sterling, VA, loading dock levelers Jamesburg, NJ, loading dock levelers Springfield, MA.

We want to work with any commercial setting that involves dock specializing in food distribution, retail, and manufacturing. We are servicing Service Areas: Sterling, VA, Baltimore, MD, Jamesburg, NJ Delaware, Eastern Pennsylvania, New Haven, CT, Farmington, CT, Windsor, CT, Hartford, CT, Fairfield, CT, and Springfield, MA. You may reach us with these contact details: Sterling, VA (703) 450-2800, Baltimore, MD (410) 536-0505, Jamesburg, NJ (609) 448-6550. You may also visit our sites: https://www.justriteequip.com/contact/ and https://www.justriteequip.com/service-request/.

Summary: Just-Rite Equipment is one of the largest providers of loading docks and door equipment in the United States; you can depend on them to provide you with superior quality and exceptional service. Their parts department is available when you just need something quick and our hours and shipping are convenient as well.

What are the Advantages of Installing Wayne Dalton Commercial Garage Doors in Baltimore, MD

Every business has a unique need that may be served by a commercial garage door. A commercial garage door has been engineered to secure the residential home from any unwanted events including the intruders.

A garage is one of the important areas in the house where valuable possessions are stored such as but not limited to the cars, hardware power tools, and even antique furniture with a high sentimental value.

Basically, a commercial garage door is designed with durability that it can even withstand the harsh rampage of a hurricane. It is usually being assembled using several layers of aluminum, steel, and insulation in order to protect the storage area and even the house where it is being attached from precipitation.

There are several types of commercial garage doors but not all have the same high quality and durability as the products of Just-Rite Equipment.

Just-Rite Equipment is a division of DuraServ that provides high quality and dependable commercial doors. Our commercial garage doors are cost-effective because a design with a see-through view may be assembled. As a matter of fact, we offer design consultations to outline your preferred architectural door design that will match the architectural design of your residential home.

Our garage doors are high-speed, noise-free and can withstand hard impact from car bumps. These are high-end commercial doors with efficient functionality to meet your facilities’ regular engagements.

We offer several types like the knock out doors, sectional doors, steel doors, and other high-performance commercial doors within Baltimore, Maryland. We have installed different varieties of commercial garage doors that offer distinct functionalities and aesthetic appearances.

Further, we likewise offer our maintenance service on a lenient or fix schedule to ensure efficient lubrication and other pertinent undertakings. Furthermore, we offer our repair and replacement services too in order to address the defects of your old garage door to restore its original vigorous performance.

Aside from that we also offer our efficient service of commercial door installation where our well-trained technicians will facilitate their professional skills to install these beautiful and high-quality garage doors.

For your needs related to garage door installation, commercial garage door installation, Wayne Dalton garage doors, garage doors, garage doors Baltimore MD, garage doors Sterling VA, and garage doors Jamesburg NJ, you may visit our official website to learn more about them at https://www.justriteequip.com/products/door-products/

For your queries, you may reach us at the following telephone numbers:

· Sterling, VA (703) 450-2800
· Baltimore, MD (410) 536-0505
· Jamesburg, NJ (609) 448-6550

You may also contact us via our webpage at https://www.justriteequip.com/contact/ to discuss your concerns.

For your service request, you may send them at https://www.justriteequip.com/service-request/.

Our service areas will always be ready to serve you better at Sterling, Virginia; Baltimore, Maryland; Jamesburg, New Jersey. We will be happy to see you soon.

Wayne Dalton - FireStar 700 Rolling Steel Fire Door an Innovative Solution for Fire Protection of Commercial Facilities in Sterling, VA

Safety is an essential part of living, for it is a state of not being able to get harmed by unexpected circumstances, however, a lot of people do not consider safety.

Accidents by fire may seldom be a cause for injuries, but injuries leave permanent marks on the person, places or establishments. Damage it may cause is much more expensive than that of safety measures. Would you like to spend more than what you can afford? For example, a warehouse full of ignitable or paper materials, your storage must contain safety features against fire attracting weather and protects storage while maintaining its thermal integrity.

Likewise for commercial establishments, businesses with rolling steel doors are manageable not just by its feature in which you can install rolling steel doors with large structural openings so that the transfer of materials, to your storage can be easier, but also designed as weather-resistant, and fire protection safety.

For over 60 years, Wayne-Dalton flourishes their expertise in designing a residential and commercial garage door that started from building wooden doors from parts being made in Wisconsin.

Over the next several years, the company expanded and added more products to its line, including steel commercial rolling doors, higher energy-efficient insulated garage doors, and the invention of Thermo span doors, which propelled the company ahead of its competition. From custom wood to classic steel to carriage house to designer fiberglass, they have garage doors to suit every style of home and budget, plus tons of color to choose from, window, and decorative hardware options to truly customize it as your own.

Now the innovation still continues and they have formulated a rolling door that answers a “How to protect your properties from any forms of weather damage situation”.
Realizing the global climate change, especially in Sterling, VA’s climates, as characterized by hot and humid summers which also can attract natural fire when unacknowledged, Wayne-Dalton has the solution.

Unlike any other commercial rolling steel doors, Wayne-Dalton Firestar Rolling Steel Fire Doors provide a practical and innovative solution to safety and fire protection.

When it comes to its safety, Firestar rolling doors can be drop tested easily and reset in a matter of seconds at any time. And it guarantees you that it is user-friendly and resetting would not require a technician to help and would function well in case of events of the fire.

When it comes to Wayne-Dalton’s Firestar Rolling Steel Fire Doors, reliability, these doors were tested and approved for a minimum of 20, 000 cycles to meet the requirements of famous agencies such as Underwriters Laboratories and Factory Mutual and to conform to NFPA Standard 80. Wayne-Dalton incorporates one standardized component design for all FireStar Rolling doors that regardless of its size, these doors utilize few parts than other models. It reduces also the chance of having a possibility of potential help from technicians in the future.

Wayne Dalton - FireStar 700 Rolling Steel Fire Door

Key Features:

Planetary Gear Design: Approved and Tested
Cycles (Planetary Gear Design): 20,000 cycles (Min.)
Technology: Viscous Governor
Mechanism: Preassembled(Drop-out)
Cable Routing : Single Fusible Link
Motor: Chain Hoist/Lift Up or Crank Operation
Standardized Component Design: All Door(Sizes)
Available: Left-hand or right-hand operation
Approved: UL / FM approved
Smoke Control/Draft Package: SmokeTite® UL labeled

To know more about Wayne Dalton FireStar door, or any of our rolling steel fire doors, please call Just-Rite Equipment at Sterling, VA (703) 450-2800, Baltimore, MD (410) 536-0505 and Jamesburg, NJ (609) 448-6550, you can inquire about our rolling steel fire door Sterling VA, rolling steel fire door Baltimore MD, and rolling steel fire door Jamesburg NJ.

Make that service request now at https://www.justriteequip.com/service-request/, or directly contact us through our website at https://www.justriteequip.com/contact/.

You can also visit personally our Service Area Offices at Sterling, Virginia; Baltimore, Maryland; and Jamesburg, New Jersey.

Wayne-Dalton Aluminum Full View Doors Suited for Commercial Store Fronts and Buildings Visibility in Baltimore, MD

Baltimore, one of the most populous cities in Maryland as well as recognized as the 30th most populous city in the United States with a population of 602,495 in 2018, also became the largest and proud independent city in the United States. Because of its independence, and became populous, the demand for trading is high, thus, any business to be established in this city will be recognized.

With regard to this, entrepreneurship became the hottest cake in the city. A city with good architectural structures and varieties of style that appeals to the crowd, the tightest battle to win the same goods competition every entrepreneur would consider is, how the store will look like? How can you compete in the market using styles? Will you consider a structure that was surrounded by walls and decorations in it? Or would you rather show the city to your customers?

A full view door that shows the store from the inside and shows the city from the outside can be a great idea considering tourists might come to the city. A wall or tradition doors can also fit in just right, but this is 2019 and change comes in handy. Showing them what they would want to see from the outside is never a bad idea, rather an advantage because you will never waste efforts in entertaining questions from people what do you sell, what are your products because basically they can already see it from the outside.

Come to think of installing commercial, full-view doors, but does any other commercial doors to show you the best? Are you sure you are coming to the right company that installs quality commercial, full-view doors?

Just-Rite Equipment, a division of Duraserv, offer one of their best commercial sectional door model-Wayne-Dalton Aluminum Full View Doors, suitably best for commercial store fronts and buildings in Baltimore, MD.

Wayne Dalton Aluminum Full View Doors comes in with aluminum full view doors and commercial sectional doors that will surely fit in your advantage. Unlike other commercial doors in the market,

Wayne Dalton doors are manufactured using high-quality materials for excellent durability. All stiles and rails are expelled aluminum alloy 6063-T6 and feature a reduced edge around panels. Manufactured from hot-dipped galvanized steel, the tracks and hardware surely would give you less than worry.

Featured doors have vinyl seals between sections and on the bottom of the door. When you desire maximum visibility, and lighting surely Wayne Dalton doors had it for you. These aluminum full-view doors create a pleasant environment inside while showing a warm and open look at the outside. And when we say, it’s friendly, yes it was! Considering it was weather-resistant, maintenance-free, and ideal for any kind of shops you would like to put up.

Wayne Dalton Aluminum Full View Doors

General Highlights

Door Model: Model K-AL Aluminum Sectional Type
Max Wide: 24’
Max Height: 16’
Section Thickness: 2”
Tracks: Hot-dipped galvanized steel (Weather tight closing)
Hinges /Brackets: Hot-dipped Galvanized Steel
Glazing – 1/8” DSB Glass Standard
Ventilation Panels: Aluminum panels (Optional)
Counterbalance:
10,000 cycle(Minimum) Rated Helical Wound Torsion Springs
Warranty: Limited One Year

To know more about Wayne Dalton Aluminum Full View Door’s technical specifications, please click on https://duraservproducts.s3.amazonaws.com/commercial-sectional-doors/product72/product72%20SPECIFICATIONS.pdf.

To ensure your chance of having quality doors, Just-Rite Equipment offers aluminum full view doors from the following areas: Sterling, VA (703) 450-2800, Baltimore, MD (410) 536-0505, Jamesburg, NJ (609) 448-6550.

You may directly contact them at https://www.justriteequip.com/contact/, our service area technicians would be happy to answer any queries about aluminum full view doors Sterling VA, aluminum full view doors Baltimore MD, and aluminum full view doors Jamesburg NJ.

Revamp your shops and never be afraid of showing the world what you sell! Just-Rite Equipment can create a good quality of aluminum commercial doors that you need in your future business, make that service request now at https://www.justriteequip.com/service-request/.

Why Choose Hydraulic Dock Levelers for your Loading Dock Facility in Sterling, Virginia

With the integration of technological advancements in the warehousing industry, it is worthy noted that it has been efficiently undertaking the prompt loading and unloading of goods and supplies to and from the delivery trucks. As an result, the commission of delays has tremendously been addressed over the past years.

This efficient performance of warehousing has something to do with the proficient loading dock system particularly the loading dock leveler. A dock leveler is part of the system as it is mounted on the foundation of the loading dock to bridge the delivery and distribution of the goods and supplies. It fills in the gaps to smoothly facilitate the passing through of the delivery strollers to expedite the storage process and prevent pertinent untoward accidents.
Safer working conditions lead to better work environments and happier workers, and happier workers lead to a productive business.

Before we discuss the importance of such levelers, let’s first understand what these levelers for docks are and how they function.

When we say dock levelers, we are referring to the permanent fixtures mounted at the dock’s door. It is primarily comprised of a metal plate known as lip and placed in a stowed position. It is being operated to bridge the dock and delivery truck trailer.

These levelers are responsible for various functions and can either be telescopic or hinged. Similarly, they can also be automatic or manual.

The importance of dock levelers has usually been ignored due to reason attributable to the fast phase conduct of business on a regular basis. The required planned maintenance is likewise being forgotten and because of this, the risk that eventualities may transpire sooner becomes imminent.

However, with the utilization of hydraulic dock leveler, the regular maintenance is carried out in a simple and worry-free manner because it does not have the required pull chain operation anymore as compared to the mechanical dock leveler.

Just-Rite Equipment offers a wide array of high quality and durable hydraulic dock levelers and this is the right company with the right dock leveler product for you.
Basically, a hydraulic dock leveler will cost more upfront than a mechanical one but if you include the maintenance costs, you may realize the overhead cost savings especially if the comparison goes for a longer period.

Just-Rite Equipment is a division of DuraServ since 2001, we are known for providing high-quality and dependable commercial doors and loading docks including the loading dock levelers to customers in the Mid-Atlantic regions. Our team of professionals offers design consultations with you outlining the timelines, costs and the care methodology covering your purchased product from us.

Over time, the equipment may depreciate and maintenance is a necessity. To this end, we offer our annual maintenance program to provide you with the opportunity to extend the life of your dock levelers. If repair service is required, our service department is available for an over-the-phone consult to possibly troubleshoot your issues before the conduct of an onsite repair visit.

The following are our high-end hydraulic dock leveler products to provide you with the glimpse of the advance innovation:

To learn more about these products, please visit our official website page at https://www.justriteequip.com/products/dock-levelers-lifts/hydraulic-dock-levelers/

For your needs about hydraulic dock leveler, loading dock leveler, dock levelers, Serco Hydraulic dock leveler, and hydraulic dock leveler Sterling VA, Baltimore MD, Jamesburg NJ, you may call us at the following contact numbers:

Sterling, VA (703) 450-2800
Baltimore, MD (410) 536-0505
Jamesburg, NJ (609) 448-6550

You may also contact us online through this webpage: https://www.justriteequip.com/contact/ and for your service request submissions, you may send them at https://www.justriteequip.com/service-request/.

Our service areas are open to serve you located at Sterling, Virginia; Baltimore, Maryland; Jamesburg, and New Jersey. Visit or call us now and we’ll be glad to provide you with the utmost service you deserve

Wayne Dalton - Rolling Grille for Commercial, Industrial, Retail and Institutional Applications in Baltimore Maryland

Since its inception 60 years ago, Wayne Dalton has been serving the residents of Baltimore, Maryland with a dedication to being the garage door partner whose innovation drives dealer productivity and provides industry-leading garage door solutions. As our business grew, so did our commitment to expanding our product lines, leading the company to become one of the largest door manufacturers in the United States.

Not only does Wayne Dalton offer a broad selection of residential garage doors, but we also have a complete line of doors for commercial, industrial applications, retails, institutions and other applications. Committed for perfection, by combining our commercial rolling door’s designs such its high performing door with high access control, and high-speed door’s high-traffic area features for both interior and exterior applications, Wayne Dalton has a wide range of products that can provide a door solution for virtually any application.

Why choose Wayne Dalton - Model 600 Rolling Grille?

Wayne Dalton - Model 600 Rolling Grille, offer total security, visibility, and ventilation in a number of patterns and finishes for commercial, industrial, retail, and institutional applications. Open-air rolling commercial grilles provide access control and off-hour security for interior and exterior openings. Rolling grilles are an ideal solution for high traffic areas like parking garages, auto dealerships, warehouses, airports, and mall retail stores.

What are its Design Features and Applications?

Aesthetically Modern Designs

Wayne Dalton - Model 600 Rolling Grille are perfectly designed for commercial businesses who want to make a statement with identity, by offering visibility of company products with good ventilation, at the same time offering an aesthetic marketing expression of modern style. Model 600 Rolling Grille is made of aluminum, galvanized and stainless steels, with powder-coated, a dry finishing process in which with finely ground particles of pigment and resin. Its powder coat is available in 180 colors to choose from.

Commonly seen on commercial public entry doors, Model 600 Rolling Grilleprovides light for lobbies and a more open feeling to public areas as one enters the building. Moreover, with its wide selection of grille pattern designs available ranging from G1, G3, G7, and G8 patterns, and combined with different options of creative styles, makes rolling grilles popular. The suitably ideal solution for high traffic areas like parking garages, mall retail stores, auto dealer and service centers, airports, and warehouses.

Strengthens Security

Model 600 Rolling Grille are solidly built with 5/16” galvanized steel horizontal rods, continuous from jamb to jamb, and covered with aluminum tubes that make it a perfect choice for business and home security reasons. Engineered and constructed with vertical aluminum links and horizontal steel rods with spacer tubes and end links that ensure that the grille cannot be pulled from guides, makes Model 600 door a trusted and reliable in terms of securing your premises and priceless items. Beneficially applicable for storefront commercial spaces, parking garages, auto dealer and service centers, and loading dock facilities.

Weather-Resistant

Model 600 Rolling Grille is made of solid galvanized steel, aluminum or stainless steel rods that can withstand extreme weather like wind, ice, snow, hail, and brutal climatic conditions. The bottom bar’s tubular aluminum extrusion provides more stability and strength to the grille design and adds a more robust and durable strength against different weather elements. Highly applicable for parking garages, airports, and storefront commercialspaces, that can also provide an additional layer of security without posting security personnel.

Cleverly Safety Featured

Wayne Dalton - Model 600 Rolling Grille is crafted with a smart and safe Emergency Egress System (ESS) that provides secure access to public areas, yet will automatically open fully upon detection of an alarm or power failure. This prevents being trap in the event of an emergency and allows immediate access to emergency personnel. The emergency egress grille is the complete solution for a 21st -century business, schools, hospitals, and office buildings, or other applications that require different levels of access.

To know all of your options on high quality doors from Wayne Dalton - Model 600 Rolling Grille call Just-Rite Equipmentin Sterling, VA (703) 450-2800, Baltimore, MD (410) 536-0505, and Jamesburg, NJ (609) 448-6550, or you can also visit at https://www.justriteequip.com/contact/, for inquiries with our rolling grille Jamesburg NJ, rolling grille Sterling VA, and rolling grille Baltimore MD.

You can make a service request at https://www.justriteequip.com/service-request/, or visit personally our service area offices in Sterling, Virginia, Baltimore, Maryland, Jamesburg, and New Jersey, where our expert and professional team of sales representatives would be happy to serve.

Energy-Saving Loading Dock Solutions

The act of conserving energy realistically helps the environment as well as saves money. For this reason, people nowadays eventually realized the value and even make the effort to conserve energy realizing how easy it is and the impact they can make on the environment by following simple conservation tips.

The most doable act of energy conservation is in electricity thus the emergence of a variety of other energy-saving products. One example is the uses of LED bulbs have been currently popular of all the energy-efficient lighting available offering the brightest light for the least money. Some people fear the presence of mercury in fluorescent bulbs and others are not satisfied with the quality of light from halogen. Thus, LED is still chosen as a good alternative providing a consistent light for lesser money and is proven safe.

Moreover, Just-Rite Equipment, a Division of DuraServ Corp., highly recommends the use of sustainable solutions that will improve the efficient utilization of energy while lowering the energy costs incurred. Our company offers a variety of energy-saving products in Sterling Virginia, Baltimore Maryland and Jamesburg, New Jersey. We also have solar-powered dock packages that are readily available.

Below is a brief guide of the energy-efficient products you may find most appropriate to your needs:

A. Serco S1000 Ultra Seal with Fixed Head Pad
Significant Features:
• Seals hinge air gap on trailers with swing-out doors and provide enhanced trailer access
• Standard Base Projection: 10"
• Roll-formed, galvanized steel side, and head pad backing
• Inclusions: 30" high reinforcement on tip and bottom of side pad profile; bottom foam-filled draft pads; dual color guide stripe system (Inside stripe: White, Outside: Yellow)

B. APS Turbo-ES Fan
Significant Features:
• Maximum -1275 CFM output
(Provides more airflow at lower amperage than any comparable truck fan)
• Dual articulating arm for precise positioning
• Easy-grip handle
• Thermally protected (Prevents overheating)

C. APS LED Guide Light
Significant Features:
• Highly visible for compact illumination
• Shallow depth (Reduces the chance for impact by truck trailers)
• High-impact polycarbonate construction with ribbed reinforcing

D. APS E-Saver LED Bulb
Significant Features:
• 50,000-hour extra life expectancy
• 27 watt LED uses less than 1/5 the energy of an old-style incandescent
• Special LED optics display maximum light throughout the truck

E. G-Flex LED Dock Light
Significant Features:
• Heavy-duty, flexible, 27" stainless steel arm
• Convenient On/Off switch
• 803 Lumen output
• Polycarbonate light head remains cool to touch
• 14Watt permanent LED

F. High Impact LED Dock Light
Significant Features:
• Rugged, compact design
• 18 Watt LED
• 60,000 hour LED lamp life
• Easily retrofitted or mounted remotely

G. Energy Guard Retrofit Kit
Significant Features:
• Blocks dirt, debris, insects and prevents loss of energy
• Primary Seal Assemblies while the leveler is on stored position
• Secondary Seal Assemblies to maintain the seal while dock leveler is operating above 9" above dock level
• Triangular-shaped seal and pocket design ensures longer product life
• Rear Hinge Seal Assembly blocks the flow of air at the rear of the dock leveler
• Vertical Seal Assemblies closes the gaps between the primary and secondary assemblies
• Brush Seal Assemblies providing an additional layer of protection against infiltration of dust, debris,
insects or dirt.

H. Rytec Turbo Seal Insulated Door
Significant Features:
• Extremely Fast and Quiet (Peak speed of 182"/second)
• Rilon Thermal Panel
• Thermal breaks minimize conductive thermal energy transference
• Self-repairing system
• Threshold LED light system
• Wireless system maintains door safety signals

For up-to-date information, please log on to our website at https://www.justriteequip.com/products/aftermarket-products/energy-saving-products/.

Our professionally trained technicians are available at your most convenient time. Please do not hesitate to contact us for inquiries of energy-saving products in Sterling VA, energy-saving products in Baltimore MD, and energy-saving products in Jamesburg, NJ. Or you may send your service requests at https://www.justriteequip.com/service-request/.

You can visit our service areas nearest you in Sterling, Virginia: (703) 450-2800, Baltimore, Maryland: (410) 536-0505, and Jamesburg, New Jersey: (609) 448-6550, or check out our website at https://www.justriteequip.com/.

Why Install an Overhead Rolling Steel Door for Your Commercial Business in Baltimore, Maryland

If you are thinking of building/ rebuilding or remodeling a commercial property and are searching for low-maintenance, quality doors, you might consider installing a rolling steel door. Commercial rolling steel doors come in various weights and can easily fit in any space, making them flexible enough to accommodate business owners' needs.

In the rolling steel industry, Just-Rite Equipment, a Division of DuraServ Corp., is the largest provider of door equipment in the United States. Furthermore, we have been proven to provide dependable and durable commercial rolling steel doors in areas in the Mid-Atlantic region, specifically servicing Sterling, Virginia; Baltimore, Maryland; and Jamesburg, New Jersey. A rolling steel door at Just-Rite Equipment can definitely offer you or your company a lot of benefits with the available materials from the best companies such as Serco, Kelly, TKO, using the most preferred brands like Cornell/ Cookson, Clopay, CHI, Wayne Dalton and Haas.

The following are the evident reasons why installing an overhead rolling steel door is deemed to be beneficial:
Reason Number 1: Security
When it comes to safety and security, steel doors of the variety are impossible to break into. They are built to be highly secured which makes then amazingly beneficial and further brings you peace of mind. Any thief would have to go through an extensive amount of work to try to break into this type of door.

Reason Number 2: Insulation
Another obvious benefit of these types of doors is the insulation they provide. The foam within the doors provide significant insulation, which keeps heat as well as cold from making their way into the room. Moreover, this results in energy savings as far as your electric bill is concerned.

Reason Number 3: Durability
Overhead doors are made out of heavy-duty steel or aluminum which are can withstand daily wear and tear, making them incredibly durable. In addition, they can withstand many types of weather, including ice or even heavy wind.

Reason Number 4: Space-saving
Unlike foldout garage doors which must be pressed inward when opening, roll-ups go directly upward, taking up no floor space at all. In this way, you can store items right up to the edge of your facility with nothing to worry about.

Reason Number 5: Noise Reducer
One excellent benefit of roll-up doors is their ability to keep noise from coming inward. Reducing noise is one reason why overhead roll up doors do a great job because they are sealed at the edges of the doorways, thus stopping sound waves that may penetrate through any possible passage. Also, insulated overhead steel doors provide a higher level of sound barrier because of their thickness.

For all your overhead steel rolling door needs, please do not hesitate to contact our available service areas at (703) 450-2800 for those living near Sterling, VA; (410) 536-0505 for those near Baltimore, MD; and (609) 448-6550 along Jamesburg, NJ.

For service request, please visit our website, https://www.justriteequip.com/service-request/. Our service technicians would be happy to answer inquiries with regard to commercial rolling steel doors Sterling VA, rolling steel doors in Baltimore, and commercial rolling steel doors in Jamesburg. For further information and details, visit https://www.justriteequip.com/products/door-products/commercial-rolling-steel-doors/.

Turnkey Installations for Your Loading Docks

Loading dock businesses are growing and so are companies who are still starting from scratch or finding ways and means to improve and upgrade their businesses. Turnkey installation from Just-Rite Equipment provides solutions for your loading dock problems.

What is turnkey installation in loading docks?
Turkey installation is a systematized and customized installation for loading docks that can be service- or product-designed, and is built, installed, and supplied fully complete and operable. Turnkey installations can deliver a solution to loading dock companies that are not fully equipped, have inefficient and ineffective systems, and have mismanaged resources that can cost company money and even lead to bankruptcy.

Why Just-Rite Equipment?
When it comes to loading dock solutions, Just-Rite Equipment is the answer. We have a complete line of high-grade and reliable commercial doors, loading dock equipment and accessories, dock designs, and turnkey installation services.

For 18 years, Just-Rite Equipment, a division of Duraserv Corp., has been the leading service provider in the loading dock, door and equipment industry and has been delivering service on a national scale to customers with large facilities, often in multiple locations across the United States and Canada. It is in partnership with several top-notch names in the industry like Secro, TKO, Kelly, Cornell, CHI, Haas and Wayne Dalton.

What can Just-Rite Equipment offer?
Just-Rite Equipment is not just your ordinary loading dock business; with our extensive years of experience in the industry, we have optimized our operational efficiencies and advanced energy usefulness to the full by using appropriate product lines suitable to an almost perfect loading dock. Our team of highly experienced and trained professionals can offer conceptualized designs based on the client’s desired timelines, budgeting, and control management systems.

Moreover, Just-Rite Equipment is highly detailed, with loading dock estimates that can save costs and, at the same time, can minimize energy use, thus gaining more return of investment. Whether the client is just starting his business or making an upgrade to an existing loading dock, we have the product line and know-how to lessen maintenance costs, maximize the productivity of workers, and, most importantly, save more monthly bills.

What makes Just-Rite Equipment unique compared to other loading dock companies?
Just-Rite Equipment is a one-of-a-kind loading dock company in terms of expertise and equipment in all aspects of industry and applications. We are experience-wise and have an understanding of warehousing and distribution, food and beverage, pharmaceuticals, refrigeration/cold storage, manufacturing, security facilities, heavy industrial applications, transportation/transit, retails, and auto dealers/service centers. With our long years of experience and expertise in vast areas of the loading dock industry, we assure our clients that we can deliver any turnkey installation services best suitable for any loading dock need.

Make that call happen! Contact Just-Rite Equipment at our offices in Sterling, Va (703) 450-2800; Baltimore, MD (410) 536-0505; and Jamesburg, NJ (609) 448-6550, or you can make a service request now at https://www.justriteequip.com/service-request/. Our service area offices are available to help you with your turnkey installations in Sterling VA, turnkey installations in Baltimore, and turnkey installations in Jamesburg.

You can also personally visit our service area offices at Sterling, Virginia; Baltimore, Maryland; and Jamesburg, New Jersey, where our expert and professional team of sales representatives would be happy to serve you.

Things to Know Before Choosing a Dock Seal or Dock Shelter

Selecting the right ones and conidering the factors will ensure you to choose the right dock seal or shelter for your businesses.

Understanding Seals and Shelter

Loading Dock Seals help you create a strong closure especially in loading a dock. consistently maintains tempartures and avoids the entry of dampness and debris.

There are some materials that requires specific factors to be in place for a successful shipment. Dock seals make an airtight around the loading environment. They give the biggest and highest level of protection for sensitive loads and avoids undue damage to equipments and materials.

Choose the Right One

Loading docks differs from one another. that's why you need to choose the best seal or shelter for your needs. It doesn't have same sizes.

Luckily, there are a lot of models that are available to meet different businesses and industries. You are free to select from a wide range that includes compressions seals, inflatable one and hybrid models.

Consider some Factors

Dock shelters and seals must be selected based on different kinds of factors that concerns to your business.

There are some loading vehicles that use trailers and consists of hinged doors. This strengthens the amount of air that can lance through the gaps and created by the hinges.

Furthermore, airframe infltatable shelters can also be a good choice to meet changing demands and supplies a cost-effective solution when working with different types of loading equipment.

Some loads need a specific climate to have a successful transport. These includes pharmaceutical and food products. Compression and inflatable shelters are ideal for these kind of materials and avoids untoward changes in the temperature.

Being eloquent in these key factors before selecting a dock seal or shelter will make you sure that you have the right loading equipment for your needs. Seals and shelters can help control the loading environment and cater a wide range of needs for your businesses.

Looking for the right dock seal and shelter for your needs? Just-Rite Equipment, a division of DuraServ, since 2001, we have been known for providing high-quality and dependable commercial doors and loading docks to customers in the Mid-Atlantic regions. We also extend our services in nearby service areas: dock seals sterling va, dock seals in Baltimore, dock shelters in Jamesburg.

If you need our service, you are free to call in our service areas: Sterling, VA (703) 450-2800, Baltimore, MD (410) 536-0505, Jamesburg, NJ (609) 448-6550 or you may give us a call for Service Request: https://www.justriteequip.com/service-request/

Employee Safety in the Loading Dock Industry

According to OSHA (Occupational Safety and Hazard Administration) loading docks are considered one of the most dangerous places to work with. Statistically, there has been an estimated of 35,000 injuries each year which is caused by forklifts and other powered industrial equipment alone.

OSHA ,the federal agency suggests companies to develop safety strategies for workers in order to lessen accidents and hazardous situations from happening. Just-Rite Equipment company, the largest distributor in the world for the leading manufacturers of dock equipment, listed below are some of the common and unique safety measures that some companies should consider:

1. The truck and trailer should be restraint by using restraining devices and wheel cocks. Installing restraints both on trucks and trailers makes a sturdy and stable position, preventing early departure and trailer creep that creates accidents due to vehicles movements. Just-Rite Equipment company recommends its product model Serco SLP3000 Recessed Vehicle Restraint- effectively controls vehicle movement by grabbing and holding the rear impact guard throughout the loading/unloading process. For other truck restraints models having unique features you can check @ https://www.justriteequip.com/products/safety-equipment-truck-restraints/truck-restraints/.

2. Install Dock Lighting System.
Lighting systems give signals to the truck driver and dock loader what the status of the workloads. Using the traditional red/green, stop/go “traffic lights” signals the driver when to enter, move the vehicle and make a full stop. Just-Rite Equipment company recommends APS Dock Strobe Maintenance Light- provide brighter flashes and extended use. Its strobe tube light output is over 100 candellas with a 3 joules flash intensity.
For other lighting systems with unique features you can check @ https://www.justriteequip.com/products/safety-equipment-truck-restraints/safety-lighting/.

3. Using Barrier Devices on Every Loading Truck.
Barrier devices on trucks will prevent the trailer from accidental rolling over and shifting positions . When such accidents do happen, workers may fall off the dock and injury occurs.Just-Rite Equipment company recommends product model Dock Guard™ Safety Barrier Lip-protects personnel, goods and equipment from accidentally rolling off the dock. For other barrier devices with unique features you can check @ https://www.justriteequip.com/products/safety-equipment-truck-restraints/impact-barriers/.

4. Use Assorted Protective Systems.
The demands of ensuring safety have become more complicated, by using different protective systems like safety gate devices, anti-impact tracks, sentry rails, trak sentries, track guards and other protective systems, loading docks would be much safer place to work. Just-Rite Equipment company recommends product model DGBM Serco Dock-Guard Safety Gate-in a closed position, protects personnel, goods and equipment from inadvertently falling off the loading dock through an open dock door.

For other protective systems with unique features you can check @ https://www.justriteequip.com/products/safety-equipment-truck-restraints/protective-systems/

In addition,below are some suggestive general safety measures practiced:
1.Check personnel’s documentations who handles heavy machinery with regard to OSHA trainings and authorizations.
2.Install cameras around security perimeters, besides protection it also helps to save money on insurance costs.
3.Hire an outside consultant to re-assess the overall safety of your loading dock, possibly there could still be lapses and shortcomings that could even save you more money.
4.Invest in hiring the best people ideally suited for the position ,if possible with OSHA certifications and authorizations and with years of experiences.

Contact Just-Rite Equipment now and make that reservation happen @ https://www.justriteequip.com/contact/, or you may directly contact us for service request: https://www.justriteequip.com/service-request/.

Additionally, our service offices at Sterling, VA- (703)450-2800; Baltimore, MD- (410) 536-0505 and Jamesburg, NJ- (609) 448-6550 with our service technicians, are ready to answer to all your safety docking needs including inquiries with regard to Sterling truck restraints, protective systems for loading docks in Baltimore, protective systems for loading docks in Jamesburg and other safety products.

Or you may personally visit our service offices @Sterling, Virginia; Baltimore, Maryland; and Jamesburg, New Jersey. For other details click on our website @ https://www.justriteequip.com/ .

Compare Serco Mechanical Dock Leveler vs. Serco Mechanical Edge-of-Dock Leveler vs. Kelley Model CM Mechanical Dock Leveler

Serco brand, being the leader in the loading dock industry for more than five decades, has a reputation to be reliable and trusted, and more than ever has focused on safety products, programmable control systems, and hydraulic dock levelers.
And Just-rite Equipment Company has been carrying Serco products for 17 years. We have been known for providing high-quality and dependable loading docks and commercial doors.
Loading docks are the ones linking between the transport vehicles and the facility, loading dock levelers aid and make a passable section between the warehouse and the truck. Selecting the right loading dock leveler is important and the result will be minimal damage to the equipment and products, fewer employee injuries and much lower costs on maintenance.

For comparison, the Just-rite Equipment Company carries three types of loading dock levelers namely: Serco Mechanical Dock Leveler(Serco Mechanical Dock Leveler WL / Serco Mechanical Dock Leveler WS), Serco Mechanical Edge-of-Dock Leveler and Kelley Model CM Mechanical Dock.
Serco Mechanical Dock Leveler
(Serco Mechanical Dock Leveler WL/Serco Mechanical Dock Leveler WS).

Special notable product features:

Serco W series mechanical dock leveler is created to be safe for the operator to use, highly reliable and for made to the last usage. Armed with latest Serco design features like a CLEAN FRAME @design for effortless trash and debris disposal in the leveler pit, and SAFETFrame@design for structural support added with premium features consist of single point adjustment extension spring counterbalance. Moreover, the float is held down by POSI-TRAC and the lip control declining the walk-down force and enhancing the lip extension is managed by HYDRA CAM Lip Control. The total product is the latest concept in technology innovation.

Additional specifications :
Single Adjustment Point Extension Spring Counterbalance
High Tensile Steel Lip, Deck & Beams
Structural Steel Safety Legs
Working Range Toe Guards
Below-dock End loading Capability
16” Lip Standard
Grease Fittings
Integral Maintenance Strut & Lip
Heavy-duty B410-14F Dock Bumpers

The Serco mechanical dock leveler is available in two types of levers namely: Serco Mechanical Dock Leveler WL / Serco Mechanical Dock Leveler WS. Both Mechanical Dock Levelers have the same specifications, however, the difference is on the capacity (high) where the Serco Mechanical Dock Leveler WL can contain 30k and 35k while Serco Mechanical Dock Leveler WS can contain 40k, 45k and 50k.

For more detailed technical specifications, you can click on https://www.justriteequip.com/products/dock-levelers-lifts/mechanical-dock-levelers/#SercoMechanicalDockLevelerModelWL

Serco Mechanical Edge-of-Dock Leveler.

Serco mechanical edge-of-dock leveler is a useful and economical option for portable plates.
It is being installed to the front of the dock, making unloading and loading trailers more convenient for medium traffic loading trucks.

Special notable product features:
for more developed strength it has an open lug-style lip hinge (frontal)
protected fully by tire laminated dock bumpers
designed to make perfectly clear the installation procedures using EZ-Hang™ installation tabs.

Additional specifications:
High Strength Steel Tread Plate (Ramp & Lip)
Robotic Welding for improved strength, quality, and consistency
Reliable Dual Extension Spring Lifting Mechanism
Ergonomic Design – Easy operation that requires less lifting force
Heavy Duty Steel Lifting Handle with Safety Grip
Operating Range is 5″ (127 mm) above to 5″ (127 mm) below the dock
Effective Working Range is 3” (72.6 mm) above to 3” (72.6 mm) below the dock
Lower Profile Design reduces interference with material handling equipment
Beveled Lip Edge (11 degrees) provides a smooth interface with trailers
15” (381 mm) Lip Standard (Optional 17” (432 mm) lip available for refrigerated trailers)
Integral Maintenance / Service Strut

For more detailed technical specifications, you can click on https://www.justriteequip.com/products/dock-levelers-lifts/mechanical-dock-levelers/#SercoMechanicalEdge-of-DockLeveler

Kelley Model CM Mechanical Dock Leveler
The Kelley model CM mechanical dock leveler gives strength with durability and remarkable performance. With nine different models to choose from, size dimensions from 6’x6’ to 7’ x10’, with the leveler’s unlimited float hold-down which requires less-force to settle in its place. Compared to conventional mechanical dock levelers, the Kelley model CM mechanical dock leveler has a minor lifetime cost of ownership.
Special notable product features:
unlimited float hold-down
Self-regulating lip extension
Working range toe guards
Below-dock end loading effectiveness
Essential maintenance strut and lip support latch

Additional specifications :
New! Exclusive SafeTFrame® Design
Open Subframe Design
Single Adjustment Point Extension Spring Counterbalance
High Tensile Steel Lip, Deck & Beams
Structural Steel Safety Legs
16″ Lip Standard
Grease Fittings
Heavy-duty B410-14F Dock Bumpers

For more detailed technical specifications, you can click on https://www.justriteequip.com/products/dock-levelers-lifts/mechanical-dock-levelers/#KelleyModelCMMechanicalDockLeveler

If still in doubt of which type of loading dock leveler is ideal for your company, let Just-Rite Equipment, one of the largest providers of loading docks and door equipment in the United States help you to choose a safe, economical, strong and user-friendly leveler for your company.
With our convenient service areas: Baltimore, Maryland, Jamesburg, New Jersey, and Sterling Virginia, Delaware and Eastern Pennsylvania we can quickly service any part of the Mid-Atlantic region.

We offer service requests especially for loading dock levelers, to name a few like Virginia Loading Dock Leveler, Maryland Loading Dock Leveler, and New Jersey Loading Dock Leveler, just click on our Service Request https://www.justriteequip.com/service-request/.
You may call us at Sterling, VA-(703)450-2800; Baltimore, MD-(410) 536-0505 and Jamesburg, NJ- (609) 448-6550 or at our website https://www.justriteequip.com/.

Your Checklist When Purchasing Commercial HVLS Fans

First-time buyers tend to have a lot of questions about HVLS fans. After decades in the industry, Just Rite Equipment has heard many of them.To help facility managers, architects and engineers who are in the process of buying or researching HVLS fans, we’ve made a checklist when purchasing Commercial HVLS Fans.

1. Efficient in Air Management

Because of its special mechanism, a HVLS fan is able to regulate the temperature of a warehouse facility in an effective and efficient way. HVLS fans de-stratify the air and blend heat layers that build up from the ceiling down. This process helps remove trapped heat pockets that are common in large facilities.

2. Energy Saver

In using an HVLS fan, you will be able to circulate air inside a building with less need for air-conditioning units. An HVLS fan's energy consumption is also low, making it a strong option against other solutions in the market.

3. Provides Comfort

With better air distribution, less noise, and less energy consumption, the overall positive impact greatly benefits the people in the area. For example, employees who work at a warehouse will feel better because of better ventilation, which means better work environment, consequently resulting to a better quality of work.

There are many elements involved in choosing the best HVLS fan solution for your facility in Baltimore, Maryland, Jamesburg, New Jersey, and Sterling, Virginia areas. Just Rite Equipment knows that purchasing an HVLS fan is a large decision and understanding the new technology comes with a lot of questions.

As a leader in high volume, low speed fans (HVLS), Just Rite Equipment’s dedication to quality is unparalleled. Beyond just comfort, our products are custom-designed with safety, productivity, and even the environment in mind. Plus, it’s all backed up with an extensive warranty to give you piece of mind that you’re making a smart investment. Learn more about what sets Just Rite Equipment’s fans apart or call us at STERLING VA (703) 450-2800 ,BALTIMORE, MD (410) 536-0505, JAMESBURG NJ (609) 448-6550 Or Contact us for Service Request: https://www.justriteequip.com/service-request/

Saving Money at the Loading Dock in Pharmaceutical Manufacturing

Pharmaceutical manufacturing is a highly regulated facility, dealing with an equipment failure of any kind can turn into a major loss of time and money. And while all of the equipment that handles the processing of pharmaceuticals is checked routinely, loading dock system in pharmaceutical manufacturing in Virginia, Maryland, and New Jersey is often neglected.

However, smart facility managers will treat the loading dock. They might not like the idea of semi-annual checkups, but they know catching a small problem during a routine exam is better than ending up with a total fix down the line.

Loading dock equipment—such as dock levelers, vehicle restraints, and dock doors —get battered by forklift traffic and tractor trailers on a daily basis. Eventually, they will have problems, as evidenced by the fact that 85 percent of all equipment failures are due to improper maintenance.

It can take a forklift as many as 50 crossings or more just to load or unload one trailer. Extrapolate this across an entire day and multiply by 250 workdays and it can be more than 100,000 crossings in one year. Considering the average forklift weighs around 9,000 pounds without carrying a load, it becomes easier to see why levelers, restraints, and other equipment can break down. Even the best, most well-made equipment can’t take that kind of beating forever.

A host of problems may arise when equipment unexpectedly fails, ranging from replacement costs to inefficient downtime at the loading dock. But, the immediate concern is worker safety.

From a business standpoint, major breakdowns lead to an inoperable dock. These unexpected shutdowns can cause headaches for facility managers. For operations with limited docks, this can spell disaster. For facilities that use dozens of docks, it can still lead to logistical problems for shipments moving in and out of the facility.

Using internal maintenance staff to work on such breakdowns might work in some instances. However, this solution often means that someone who is not certified to work on a leveler, for instance, is placed in a potentially dangerous situation by attempting to fix unfamiliar equipment.

If the dock equipment suffers a total breakdown, it can cost even more to replace in a rushed, emergency situation. Even companies with contingency funds can’t absorb unplanned spending long-term.

When you need a loading dock leveler repaired in pharmaceutical manufacturing, you want it done quickly because downtime impacts your productivity and profitability. You also want high-quality loading dock service that stands the test of time, assuring reliable performance and operation.
Just Rite Equip representative is ready to help when you have a dock leveler repair or need service or maintenance for any part of your loading dock system. If you’re moving to a new facility, updating your existing facility, or building out additional space, Just Rite Equip design and product experts can help you plan and outfit your new loading docks with products that fit best and meet your short and long-term goals.

Servicing Virginia, Maryland, and New Jersey, call us today STERLING, VA (703) 450-2800, BALTIMORE, MD (410) 536-0505,JAMESBURG, NJ (609) 448-6550 Or Contact us for Service Request: https://www.justriteequip.com/service-request/.

Selecting Loading Dock Doors

Picking out the most satisfying loading dock doors, yearned specifications and qualities must be met by the company. May it be looking at the equipment brand or performance; one must assure the loading dock door’s overall worth. There are lots of factors to consider in trusting one of the loading dock door companies that exist online. An ideal company must have the field expertise, a team of skillful technicians, safest procedures, high-quality types of equipment, and sustainability goals.

A division of the DuraServ Corporation, Just-Rite Equipment expertly crafts products and services for loading dock doors. Ensuring superior quality and exceptional services, it has been considered as one of the largest providers of loading docks and doors equipment in the entire US. Making sure they are result-oriented in the line of business, they also guarantee to provide maintenance services in extending the life of your loading dock doors. Here's a guide in selecting the commercial loading dock door for your growing business.

Commercial Sectional Doors

The Wayne Dalton – Model 216 Steel Sectional Door is designed to meet the needs of the most rugged applications. It features heavy-duty 16-gauge construction built to withstand severe weather, brutal use and exposure to security hazards. A variety of insulation and lite options are available for the Model 216, which is also available in a wide range of sizes.

Commercial Rolling Steel Doors

Wayne-Dalton FireStar Rolling Steel Fire Doors offer a practical and innovative solution to safety and fire protection. Its doors can be drop-tested and reset at any time by anyone, such as a facility manager or maintenance supervisor, thanks to a standard auto-reset feature.

High-Performance Doors

TKO Vertacool Cold Storage Dock Door is the industry’s first door specifically designed for use with vertical storing dock levelers. Answering the demand for a cost-effective and energy-efficient dock door for use in Vertical Storing Dock Leveler applications, TKO created the VertaCool door. More effective than a standard sectional door and less expensive than a Vertical Rise Freezer Door, the VertaCool provides superior energy efficiency at a lower cost of ownership.

A long-term reliability is the company’s standard for all of their branded equipment. Working with Just-Rite Equipment for Virginia Loading Dock Doors, Maryland Loading Dock Doors, New Jersey Loading Dock Doorscan assure your loading dock doors to be installed professionally helping the dock loading and unloading a lot more smooth and efficient. Call the Just-Rite Equipment and have your own free estimate today.

The Just-Rite Equipment is servicing the areas Sterling, Baltimore, Jamesburg, and entire Virginia, Maryland, and New Jersey. You may visit the loading dock company at 22713 Commerce Center Court, Ste. 176, Sterling, VA 21066 or call them at (703) 450 – 2800. Or send an email at servicevirgina@duraserv.corp.com. Send some inquiries atmhedquist@justriteequip.com.

Tips to Prevent Your Loading Dock Problem

Operating along the Virginia Loading Dock area requires knowledge and expertise to properly execute standard operating procedures. There are three things to be aware of whether the loading dock has been successful throughout the entire performance. First, is that operations have been handled by a knowledgeable operator, top-of-the-line machines and equipment were available, and of course, there's worker’s safety.

When working for example at a Maryland Loading Dock and New Jersey Loading Dock, one must follow all the operating guidelines. To reduce anxiety about how to perform a flourishing loading dock, read on these tips.

Familiarize Equipment Types

Even before operating the purchased equipment, it is important to request for an orientation from the manufacturer pertaining to its product's functions, controls, and safety.

Choose the Right Operator

A worker has to be fit to work in a loading dock area. It must be the right person who generally has the capacity to handle the job equipment and demands. To add it all up, the worker must also be physically fit with a positive attitude.

Maintain Safety Operations

Never ignore the idea of practicing safety operations regarding the loading dock system. It will be one of the factors to base the success of the whole system operation. Make sure every worker is attentive to the safety reminders which are given the most importance.

Ready Dock Levelers

Create a habit of doing a double inspection to check if the dock levelers are good to go. Other props related to its function must be properly placed at the same time.

Perform the Manufacturer’s Instructions

When working with devices and equipment, keep in mind what is written in the manufacturer’s manual. This is to assure that the loading dock system will run smoothly and won’t place everything at risk.

For all your loading dock needs from diverse types of equipment to services, Just-rite Equipment caters to all of these and more. They have been operating in the market with the highest level of proficiency. As successful business owners, we must also be outstanding in all operations and maintenance by picking out the best company right from the start.

The Just-Rite Equipment is servicing the areas in Virginia, Maryland, and New Jersey. Call us at STERLING, VA (703) 450-2800, BALTIMORE, MD (410) 536-0505, JAMESBURG, NJ (609) 448-6550 .

The Importance of Having Your Overhead Garage Door Installed by a Professional

In the longest time, garage doors have the exceptional innovation in its design and convenience in Virginia. At the Just-Rite Company, it is always made sure that the highest-quality and dependable Overhead Garage Doors that best fit the needs and the budget are provided.

With our team of skilled professionals working for the best of every client, one could never go wrong. Some of the high-end brands for the types of equipment are included like Serco, Kelly, and TKO.

Choosing the right professionals play a crucial role in the entire garage door installation, maintenance, and improvement process at home. These are the ones you entrust the longevity of your garage doors with. It will make everything convenient at home by choosing first which company is well-known on this field just like the exemplary of Just-Rite Company.

Our team offers professional design consultations and annual maintenance programs for your purchased services and product from the company, surely to give you superior quality and exceptional service.

By allowing the Just-Rite Company serve you with its systematic and sustainable services and solutions, you can get a team of skilled professionals for garage door Virginia to back you up.

The need for design consultation and product enhancement are ready to be shared with you upon a scheduled appointment a lot easier for garage door Maryland. Being one of the largest providers loading docks and door equipment in the United States, the Just-Rite Company is surely dependable and hassle – free. Also, one of the best things about the company is its intense mission to be the most trusted sales and service distributor in the market and they are actually living by it.

There is no reason not to settle only with this ideal company where emergency needs are well-catered in time. It has a 24-hour servicing which can be made over-the-phone as well in garage door New Jersey. It is servicing the areas in Virginia, Maryland, and New Jersey. For inquiries, you may visit their site at https://www.justriteequip.com/.

Mid-Atlantic Regions’ Leading Dock Seal, Dock Shelter and Service Provider

Benefits of Dock Seals and Shelters

Mid-Atlantic Regions’ Most Trusted Dock Seals and Shelters Dealer and Service Provider

Loading Dock Equipment, Commercial Doors, and Installation Services in Jamesburg, New Jersey

Just-Rite Equipment's Loading Dock Equipment and Commercial Doors

Jamesburg, New Jersey Industries We Serve

Jamesburg, New Jersey’s Most Trusted Loading Dock Equipment Dealer, Commercial Doors Retailer and Service Provider

Why a Loading Dock Planned Maintenance Service is Important?

What are the Benefits of a Hercules Infitting Hinged Freezer Door for Cold Storage Facilities in Sterling, VA

Why Install a Wayne Dalton – Model 900 Rolling Steel Service Door for General Warehousing Operation in South Windsor, CT

What are the Specialty Dock Levelers and Their Functions to Meet Distinct Dock Equipment Needs in Baltimore, MD?

How Door Operator Works and Its Features

Why Wayne Dalton - Model C-24 Steel Sectional Door is Suitable for Heavy-Duty Commercial Applications in Connecticut

APS Protective Systems To Keep Loading Dock Facilities Operation Safe in Jamesburg, New Jersey

What are the Differences Between an Air Powered Dock Leveler and Hydraulic Dock Leveler?

Why Choose Hercules Heavy-Duty Vertical Sliding Door for Warehouse Loading Docks in Sterling, VA

Wayne Dalton - Model 800C Thermotite Rolling Steel Service Door Designed for Tough Commercial or Industrial Application in Jamesburg, NJ

Upgrade Your Old Loading Dock System With State-of-the-Art Technology by Just-Rite Equipment

Which Type of Loading Dock Leveler is Suitable for Your Business in Baltimore, MD?

What are the Advantages of Installing Wayne Dalton Commercial Garage Doors in Baltimore, MD

Wayne Dalton - FireStar 700 Rolling Steel Fire Door an Innovative Solution for Fire Protection of Commercial Facilities in Sterling, VA

Wayne-Dalton Aluminum Full View Doors Suited for Commercial Store Fronts and Buildings Visibility in Baltimore, MD

Why Choose Hydraulic Dock Levelers for your Loading Dock Facility in Sterling, Virginia

Wayne Dalton - Rolling Grille for Commercial, Industrial, Retail and Institutional Applications in Baltimore Maryland

Energy-Saving Loading Dock Solutions

Why Install an Overhead Rolling Steel Door for Your Commercial Business in Baltimore, Maryland

Turnkey Installations for Your Loading Docks

Things to Know Before Choosing a Dock Seal or Dock Shelter

Saving Money at the Loading Dock in Pharmaceutical Manufacturing

Tips to Prevent Your Loading Dock Problem

The Importance of Having Your Overhead Garage Door Installed by a Professional